Thiết bị lọc nước Multidem

Thiết bị lọc nước cấp tự động cho máy hấp Multidem

The water demineralizer system Multidem supplies top quality demineralized water for generating steam in autoclaves. As a result, it ensures consistent and optimized performance, thereby extending the service life of your sterilizer or purification unit.

Additional spray gun
In addition, Multidem is also equipped with a spray gun. This is ideal for rinsing instruments prior to sterilization.

Very easy to operate and use

To replace a consumed filter cartridge,
open the locking handle.

Turn the locking handle as far as it will go,
then press the rinse button to release the
pressure and take the filter head off the
consumed filter cartridge.

Once you have pulled off the protective cap,
place the filter head vertically onto the new cartridge. Multidem is then ready to go again.

Your advantages at a glance

  • Consumed filter cartridges can be replaced quickly and easily without tools.
  • Multidem is suitable for use with many conventional autoclaves and purification units.
  • The spray gun can also be used to fill the sterilizers manually with demineralized water.
  • For Multidem no external power supply is required.
  • The water demineralizer system delivers consistently high water quality thus preventing limescale deposits in the sterilizers.

Multidem – Compatible with all units

1. Direct connection
    Multidem can be connected directly to Lisa Fully Automatic units and to all sterilizers with automatic water filling.

2. Via a connection system
    The Lisa, Lisa 300 and 500 and Lina autoclaves can be connected to the Multidem unit using water supply connection kit     (SAT/water supply kit).

3. Manual filling
    The Lisa MB sterilizer and all sterilizers without automatic water filling can be filled with the aid of the spray gun.

Filter head – Very easy to operate and use



The innovative locking handle on the filter head ensures fast and
convenient filter replacement without tools.

The integrated rinse button for releasing the pressure makes short work
of pre-rinsing and venting.

 

Type:

Multidem C27

Operating pressure:

2 bar – 8.6 bar (max.)

Water temperature (inlet):

4 – 30 °C / 40 – 86 °F

Nominal flow rate:

60 l/h

Water quality (out):

demineralized (EN 13060)

Water quality (in):

drinking water

Weight:

2.7 kg

Width/depth/height:

124 / 123 / 476 mm

Operating position:

vertical

Tube lengths:

2 x 3 m

Safety valve:

yes

Backflow preventer:

EB

CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ N.K.MAY MẮN

Số giấy CNĐKKD: 0302218299, ngày cấp: 09/02/2001, nơi cấp: Sở Kế hoạch và Đầu tư TP. Hồ Chí Minh.

Dental Products from W&H

W&H produces top Quality dental products as dental turbines, straight and contra-angle handpieces, piezo scalers for prophylactic treatment, products for oral surgery and sterilizers for dentistry. W&H products are used in dental practices, hospitals, laboratories and surgical units around the world and are known and respected by dentists and dental surgeons for their reliability, innovation, ease of use and lack of complexity, making treating patients easier. W&H became the first manufacturer in the world to integrate sterilizable LEDs into their dental handpieces and offer a full range of innovative couplings and powerful dental motors appropriate most treatment indications in dentistry.
The current product range of W&H includes rotating instruments for restoration and prosthetics (dental turbines, highspeed handpieces, lowspeed handpieces for preparation of crown abutments and cavities), products for the field of hygiene and maintenance (sterilizers, autoclaves and reprocessing devices), instruments for implantology (surgical devices, surgical handpieces and contra-angles) and prophylaxis (air scaler and piezo scaler), as well as instruments for dental laboratories. W&H products meet all technical standards and are widely acknowledge by users and partners alike to be reliable, with state-of-the-art design and excellent price performance ratio worldwide.